Jaguar Land Rover Approved device
Approved Jaguar & Land Rover Vehicle Application List
JLR DoIP SST (2017 - Present) Service Applications
|
Application
|
Description of Operation
|
Diesel Exhaust Fuel (DEF)
|
Allows the Diesel Exhaust Fluid (DEF or AdBlue®) level to be constantly monitored, and displays the amount required to refill the tank
|
DPFDR – DPF Dynamic Regeneration
|
The DPFDR application allows the vehicles DPF dynamic regeneration process to be undertaken to clear the DPF of soot build up.
|
DTC Read and Clear
|
The DTC Read and Clear application reads all DTCs from each module on the vehicle and also allows them to be cleared either prior of after any fault is rectified. Only the DTC Codes are displayed
|
EPBR – Electronic Park Brake Release
|
Moves the electronic park brake to the mount position and then releases the brake callipers.
|
Force Ignition
|
The Force Ignition Application turns the vehicles ignition on and holds it in the on position for as long as the JLR SST is connected to the vehicle and the application is running.
|
Oil Level Measurement |
Displays current engine oil level instantaneously on screen with a bar graph and actual levels.
|
PassThru VCI Interface |
Allows the device to be a Pass Thru VCI interface for Pathfinder and TOPIx Cloud
|
SIR – Service Interval Reset |
This application resets the service light and/or oil change reset depending on the vehicle.
|
TM Toggle – Transport Mode Toggle |
The Transport Mode Toggle application allows the vehicle to be placed in and out of Transport mode including speed limit and air suspension depending on vehicle variant.
|
TTM Toggle – Tight Tolerance Mode Toggle |
The Tight Tolerance Mode Toggle application allows the vehicle to be placed in and out of Tight Tolerance mode depending on vehicle variant.
|
|
|
We have developed further applications (2017-Present) to enhance the usage of this device. These will come as an extra cost of £140 annually. See DoIP SST (JLR00010) Subscription.
The JLR DoIP SST collects feedback session data from the vehicles you connect too. This data is collected when you connect to the DA App Hub software to check for updates.
Vehicle coverage for the applications above, are as follows:-
- Land Rover
- All MY17 to current vehicles (Defender, Discovery, Evoque, Range Rover and Velar)
- L322, L319, L320, L359, L405, L460, L461, L462, L494, L538, L550, L551, L560 and L663
- Jaguar
- All MY17 to current vehicles (E-Pace, F-Pace, F-Type, I-Pace, XE, XF, XJ and XK)
- X150, X152, X250, X260, X351, X540, X590, X760 and X761
* No support for ISO and J1850 PWM (SCP) protocol).
**Note : A separate subscription is required for JLR TOPIX (Pathfinder and TOPIx Cloud) diagnostic platforms.
*** Note: Please ensure you contact us within 30 days after registration of your device for help with setup and any troubleshooting issues.
****Note: Using PassThru or the module programming application, this device does not currently allow the successful programming of 'HPLA-14C256-B*' Gateway Modules.