JLR00010 - JLR-00005-DoIP SST for Pathfinder and TOPIx Cloud

Diagnostic Associates Ltd



Now back in stock

Jaguar Land Rover Approved device

  • Diagnostic Associates are the original manufacturers of this product.

    • This device can be used as a PassThru VCI Interface for Pathfinder and Topix Cloud, as well as stand alone applications that can be run independently without any need to be connected to the approved diagnostic system or a PC.

    • Included in the price of your device are the following applications. Plus a mini USB cable for connection as Pass thru and connection to DA App Hub:-

Approved Jaguar & Land Rover Vehicle Application List

JLR DoIP SST Service Applications

Application

Description of Operation

Diesel Exhaust Fuel (DEF)

Allows the Diesel Exhaust Fluid (DEF or AdBlue®) level to be constantly monitored, and displays the amount required to refill the tank

DPFDR – DPF Dynamic Regeneration

The DPFDR application allows the vehicles DPF dynamic regeneration process to be undertaken to clear the DPF of soot build up. 

DTC Read and Clear

The DTC Read and Clear application reads all DTCs from each module on the vehicle and also allows them to be cleared either prior of after any fault is rectified. Only the DTC Codes are displayed

EPBR – Electronic Park Brake Release

Moves the electronic park brake to the mount position and then releases the brake callipers.

Force Ignition

The Force Ignition Application turns the vehicles ignition on and holds it in the on position for as long as the JLR SST is connected to the vehicle and the application is running.

Oil Level Measurement

Displays current engine oil level instantaneously on screen with a bar graph and actual levels.

PassThru VCI Interface

Allows the device to be a Pass Thru VCI interface for Pathfinder and TOPIx Cloud

SIR – Service Interval Reset

This application resets the service light and/or oil change reset depending on the vehicle. 

TM Toggle – Transport Mode Toggle

The Transport Mode Toggle application allows the vehicle to be placed in and out of Transport mode including speed limit and air suspension depending on vehicle variant.

TTM Toggle – Tight Tolerance Mode Toggle

The Tight Tolerance Mode Toggle application allows the vehicle to be placed in and out of Tight Tolerance mode depending on vehicle variant.

    Further to the above, we have developed further applications to enhance the usage of this device. These will come as an extra cost of £140 annually. The current items covered are as follows:-

    Application

    Description of Operation

    ABS Assembly Mode

    Places New Defender and New Range Rover Sport into assembly mode so work can be carried out on the brakes.

    Adaption's Reset

     Resets the vehicles powertrain learn adaption values.

    Alarm Trigger History

    Shows the last vehicles alarm events.

    Battery Replacement

    Used to reset the vehicle battery status.

    Driver Domain CCF learn

    Allows the driver domain controller to learn the vehicle features when they have been modified, such as enabling active cruise control.

    DTC Descriptions and the Vehicle DTC Report

    DTC Read and Clear stored on the vehicle is a default application, but will display the extended DTC Descriptions and email the DTC report, as part of the subscription when connected to a vehicle in a WiFi range.  You will need to request a username and password to access this extended information.

    Live Data

    Simplified data/pid reader - please ask if you require more data options, as we can increase the support within this application.

    Radar Alignment

    Enables the drive cycle to allow the radar calibration.

    Vehicle Reset Reset the whole vehicle. 

      The JLR DoIP SST collects feedback session data from the vehicles you connect too.  This data is collected when you connect to the DA App Hub software to check for updates. 

      To ensure your device is always up-to-date before use, connect to the DA the App Hub on a regular basis.  

      Vehicle coverage for the applications above, on both DoIP and CAN based vehicles (where applicable), are as follows:-

       Land Rover Usage/Models:

      • Freelander 2 (L359)
      • Land Rover Defender New (L663)
      • Land Rover Discovery (L319)
      • Land Rover Discovery (L462)
      • Land Rover Discovery Sport (L550)
      • Range Rover (L322)
      • Range Rover (L405)
      • Range Rover (L460) 
      • Range Rover Evoque (L538/L551)
      • Range Rover Sport (L320)
      • Range Rover Sport (L494)
      • Range Rover Sport New (L461) 
      • Range Rover Velar (L560)

      Jaguar Usage/Models:

      • E-Pace (X540)
      • F-Pace (X761)
      • F-Type (X152)
      • I-Pace (X590)
      • XE (X760)
      • XF (X250)
      • XF (X260)
      • XJ (X351)
      • XK (X150)​

        Please see FAQs page (Q1/A1 and Q7/A7) for setup and use of the Pass Thru VCI Interface application on this device

        **Note : A separate subscription is required for JLR TOPIX (Pathfinder and TOPIx Cloud) diagnostic platforms.

        *** Note: Please ensure you contact us within 30 days of purchase for help with setup and any troubleshooting issues.

        ****Note: Using Pass thru or the module programming application, this device does not currently allow the successful programming of 'HPLA-14C256-B*' Gateway Modules.

        £795.00